GE fanuc IC660BBA100 Genius Block I/o Module

Email:sales6@apterpower.com    ┃  Mobile: +86-18159889985

Whatsapp:+86-18159889985        ┃  Skype: live:ariatang111

PRODUCT DESCRIPTION

IC660BBA100 is an analog I/O Block from the GE Genius series. The block has a rated voltage of 115 VAC

 Voltage/Current. The IC660BBA100 block has four independent input circuits and two independent output circuits. 

This block is quite flexible, which allows compatibility with a wide variety of analog I/O devices. Each circuit on 

IC660BBA100 Block can either receive or deliver signals in any of these five analog ranges: -5 volts DC to +5 volts 

DC, -10 volts DC to +10 volts DC, 0-5 volts DC, or 4-20 mA/1-5 volts DC, 0-10 volts DC. The first four circuits on

IC660BBA100 are inputs. The input circuits share one 12 bit analog to digital (A/D) converter. The block in-return

converts each input signal current to a digital count value. It then translates the counted value to an integer that 

represents the engineering units for that particular input.

The other remaining two are output circuits served by a 12 bit digital to analog (D/A) converter. IC660BBA100 block 

then converts the engineering units output received from the processor to a digital count value. It then converts the 

counted value to an output signal voltage. Accuracy is within 50mV on the 10V range and 5mV on the 5V range and

100uA on the 4-20mA range.  The block’s internal power supply conveniently drives the current mode outputting

loads of up to 300 Ohms each. An external 24 or 48 VDC power supply is required for loads up to 2K Ohms.

Other IC660BBA100 features include the ability to independently scale for each individual input and output; the 

ability to either enable or disable fault reports to the host for each input and output; inputs that can function either

in normal analog input mode, or report just its alarm status; low and high alarm limits for each input both in normal

input mode and alarm input mode; power default values for both output; outputs that can consequently be configured

to hold last state or default if communication from the processor is lost; and input Low Alarm and High Alarm detection.

IC660BBA100 can be used alongside any handheld monitor. However, if using handheld monitor model IC66HHM501,

 the baud rate configuration must be changed or have redundancy features configured. 

Email:sales6@apterpower.com